Drive Motor -
D&D Motor Systems, Inc.
Note: * Required Fields
For detailed specification examples, click on one of the first pictures in our photo gallery, for your specific type of vehicle.
Click here for our photo gallery.
For Pump Motors
Basic Customer Information
Customer (Company) Name:
Phone (10 digit min.) :
(Make, Model, Year):
(Ex. Kawasaki, Ninja 650, 2012)
No Load Weight:
Full Load Weight:
Drive Wheel Diameter:
Rolling Tire Radius:
Quantity of Motors Per Year :
10 or less
501 and up
* Photo Attachment Required
Send Vehicle Photo ( .jpg, .gif, .tif, .png) :
* (If you don't have a picture of the
vehicle, just do a Google search & attach something similar)
Mechanical Connection Type
(choose option below for examples):
Straight Output Shaft
Splined Output Shaft
# teeth :
Drive System Details :
What differential/transmission or belt/chain drive system does (or will)
the vehicle have? Describe the mechanical design. We have thousands of various
motor options and first need to narrow down which ones will fit your design.
Differential/Transmission or Belt/Chain Gear Ratio:
(What is my gear ratio? Click Here!)
Differential/Transmission or Belt/Chain Efficiency:
Max. Vehicle No Load Speed (on level ground):
Max. Vehicle Full Load Speed (on level ground):
Minimum Vehicle Full Speed up
What vehicle range or application duration are you hoping to achieve?
(Ex. Miles, Mins., Hours?)
Controller Make, Model and Amperage:
Max AMPS :
(Ex. Lead Acid-Flooded, Qty: 12 x 8 volts, US Battery)
Total Battery Pack Amp hours :
(Ex. 183 Amp. Hr.)
Duty Cycle Requirements :
(Ex. 10% ON, 50% ON, Continuous)
• Not sure what "Duty Cycle" means? Click here to learn more.
Duty Cycle Calculation & Common IEC Standards
A duty cycle is the percentage of a period of time in which a signal or system is active. A "period" is the time it takes for a signal to complete an on-and-off cycle. As a formula, a duty cycle may be expressed as:
D = T/P x 100%
is the duty cycle,
is the time the signal is active, and
is the total period of the signal. Thus, a 60% duty cycle means the signal is on 60% of the time but off 40% of the time. The "on time" for a 60% duty cycle could be a fraction of a second, a day, or even a week, depending on the length of the period.
To assist in the communication of this information, the standard IEC 60034-1 (Rotating electrical machines) defines several duty characteristics, denoted S1 to S8 below:
The motor works at a constant load for enough time to reach temperature equilibrium.
The motor works at a constant load, but not long enough to reach temperature equilibrium. The rest periods are long enough for the motor to reach ambient temperature.
Intermittent periodic duty
Sequential, identical run and rest cycles with constant load. Temperature equilibrium is never reached. Starting current has little effect on temperature rise.
Intermittent periodic duty with starting
Sequential, identical start, run and rest cycles with constant load. Temperature equilibrium is not reached, but starting current affects temperature rise.
Intermittent periodic duty with electric braking
Sequential, identical cycles of starting, running at constant load and running with no load. No rest periods.
Continuous operation with intermittent load
Sequential, identical cycles of running with constant load and running with no load. No rest periods.
Continuous operation with electric braking
Sequential identical cycles of starting, running at constant load and electric braking. No rest periods.
Continuous operation with periodic changes in load and speed
Sequential, identical duty cycles run at constant load and given speed, then run at other constant loads and speeds. No rest periods.
Note: Thermal Equilibrium is the state reached when the temperature rise of the mmotor does not vary by more than 2K per hour. If you don't specify the duty cycle, the manufacturer will likely assume S1.
Send By Fax to:
Or Mail to:
D&D Motor Systems, Inc.
215 park Ave.
Syracuse, NY 13204
Attn: Sales Dept.